Weber Floor Screed

I’m Andy Parkin, Managing Director of the Multi-Award Winning Speed Screed. I’m here to talk about Weber Floor Screed.

Weber Saint-Gobain produces a number of high-quality products for use in the construction industry.  This ranges from renders, tile fixing, products, mortars, insulation and, of course, Weber Floor Screed.  Their range of screeds can be used in residential, commercial and industrial settings.  All types of Weber floor screed offers the same high standard for those looking for a good quality floor screed.

Here is a brief guide to the very best of Weber Floor Screed:

Weberfloor smooth 4150/Rapid 4160

These are both thin topping, self-smoothing self-levelling screeds which can be used to level concrete, sand and cement screeds.  Once in situ, it can then be covered with any type of commercial or domestic flooring.

Useful for:  Domestic and commercial.

Key features:

• Light foot traffic after 2-4 hours (4150) or 1-3 hours (4160)
• The final covering may be applied in 1-3 weeks(4150) or 1-3 days (4160)
• Low dust, low alkaline, casein-free
• Low emissions

Where it should not be used:

• On external projects
• Where there is no final floor covering
• For underfloor heating (must be levelled first)

Weberfloor Fibre 4310/Rapid 4320

These screeds are self-levelling renovation screeds which can be used for levelling concrete, wooden boards, anhydrite screed, sand/cement screed, insulation board, tiles and bitumen.

Useful for:  Domestic and Commercial.  Underfloor heating

Key features:

• May be covered with tiles and timber laminate flooring, topping screed
• Light foot traffic after 2-4 hours/Rapid 1-3 hours
• The floor may be tiled after 12 hours (apart from tiles which should be left for 1-3 weeks)/Rapid 12 hours (2-4 days)
• High durability fibre-reinforced screed
• A good alternative to latex screeds
• Low dust, low alkaline, casein-free
• Low emissions.

Where it should not be used:

• On external projects
• It is not a wearing screed – must receive tiles or other floor covering after application of a suitable topping screed

Weberfloor Base Rapid

Weberfloor Base is a rapid-drying, self-smoothing renovation screed which can be used for levelling concrete, wooden boards, anhydrite screed, sand/cement screed, insulation board, tiles and bitumen.

Suitable for:  Domestic, Commercial and Industrial

Key features:

• May be covered with tiles and the following weber topping screeds: Weberfloor smooth 4150, Weberfloor smooth rapid 4160, and Weberfloor industry pro top 4610 industrial topping screed
• Light foot traffic after 2-3 hours
• The floor may be tiled after 12 hours – other floor coverings between 1-7 days
• High durability fibre-reinforced screed
• A good alternative to latex screeds
• Low dust, low alkaline, casein-free
• Low emissions.

Where it should not be used:

• On external projects
• It is not a wearing screed and must receive tiles directly or a floor covering after applying a smoothing or topping screed.

Weber Floor Screeds – Industrial Screeds

There are 2 industrial versions of Weber floor screeds:   Weberfloor industry pro top 4610 and Weberfloor industry rapid 4655.

The 4610 is a self-smoothing topping screed, and the 4655 is a rapid-drying self-smoothing screed and resin receiver.  Both are suitable for use in industrial areas and both benefit from the following key features:

• Low dust, low alkaline, casein-free
• Low emissions.
• Industrial use
• Foot traffic after 2-4 hours (rapid 46551-2 hours) with final floor covering after 24 hours. Light industrial traffic can be accepted after 24 hours, with 1 week before full use.

Neither product is suitable for external use and the 4655 must be covered with an epoxy resin or polyurethane coating.

For more information about these products please contact us.